How to Repair a Saab 93 Key Fob
There's a good chance that the key fob of your Saab 9-3 has a faulty electronic chip. The metal component of traditional car keys is simple to duplicate. Modern key-fobs however, come with an immobilizer to protect your vehicle.
To find out why the key fob won't work you can replace the battery on your key fob. It's a cost-effective and simple fix.
How do you program the Saab 93 key fob
Saab key fobs let you to control the doors of your car, trunk and engine. They also allow you to unlock your car's fuel door and panic buttons. Remotes can be programmed by sync them with the vehicle's radio transmitter. Plug the key into the ignition and turn the switch ON. Follow the Tech2 instructions until you have programmed the keys that you want to use with the vehicle.
Saabs are usually sold with only one key, even though they were originally designed to have two keys. You can add a second key by replacing the transmitter (which includes the transponder) and programming it in with a handheld device called Tech-2 Tech-2 at your Saab dealer. It will also require a new key to match the old one in order for it to function. This is a costly task however it's much less expensive than replacing your entire CIM system by locking cylinders. It's also cheaper if you lose the only working key.
Saab key fob replacement 93
Saab owners who have lost their only key should get an extra one as soon as is possible. The key fob isn't as traditional keys made of metal used in cars from 20 years ago. It is an electronic device that connects to the car through a specific chip. This is how the car recognizes the key fob and also stops it from being copied. It is possible to do this at an auto dealer, but the cost could be high. It is recommended to avoid this issue by purchasing an alternate Saab key from an online retailer.
It will help protect your vehicle if you lose it. A spare key is more likely to be discovered by a burglar than the stolen one. This is because most thieves don't have the equipment to copy the latest kinds of keys. They would need a specialized machine to do so however, even that is not a guarantee for protecting your vehicle from theft.
A spare key can also save you money when you replace the SAAB 9-3 remote's battery. All electronic units in the keyfob come with batteries and they will eventually fail. It is simple to change the battery, however it is important to take care not to damage the electronics inside the case. You can learn the best way to complete this task by watching YouTube videos, such as those made by Cyclone Cyd.
saab keys
If you've had trouble with an infrequent response from your key fob, then it's time to replace your battery. A dead battery could be the reason for the delay. However there are other possible reasons. This is a cheap and easy fix, so don't put off the task.
To remove the backup key, first you need to remove the fob. To do this, press firmly on the Saab logo and then pull on the key ring loop. Then, insert a flathead screwdriver in the hole on the key fob case. Turn the screwdriver around to separate the case. The plastic shouldn't be damaged if you don't apply excessive force.
You can see the electronic components inside the case after you open it. The circuit board is connected to the case by clips made of metal. If they are dirty or damaged, the fob will not function properly. You can clean them by using rubbing alcohol. It's important to note that this is a temporary solution. The clips will wear out eventually and will need to be replaced.
Test the car door locks with the backup remote prior to you replace the battery. If the backup remote works and locks, then the issue is most likely related to your primary key fob. If the problem persists after replacing the battery, there may be something else wrong with your vehicle.
Saab keyfob case with 93 keys
If your key fob's case is looking worn out, a simple solution is to get a replacement. They are easily accessible on the internet and can be easily connected to your existing remote control. The only thing you'll need is a flathead screwdriver as well as some patience. Insert the flathead screwdriver in the slot located in the middle of the case and then gently break it open. Be careful not to damage the limiters which contain the battery. After removal of the emergency key and badge, the new battery can be placed in the existing electronics. The case will not require any modification.
The best key fob case features a lining specifically designed to blocks signals from reaching the key fob. This is essential, since it is the signals that allow your vehicle to start. Some of these cases have silver layers, while others are made from copper to distort transmissions better.
A key fob cover is also a great way to protect your keys from damage. It will help keep track of your key fob and help you locate it in the dark on the way to your vehicle. Key fobs can protect your keys from theft and add elegance to your keys.